Skip to main content
Home » Storage

Tips for storing gas cylinders on-site.

Short version: upright, restrained, ventilated, separated by gas type and easy to read at a glance.
General guidance only
This page is general guidance only. Gas storage requirements vary by gas type, cylinder quantity, site layout, ignition risk and local dangerous goods rules. Confirm the current gas storage standards, state-based requirements and your own site procedures before relying on any gas storage setup.

The rules that matter

Upright, always. Acetylene must never be laid down. Other compressed gases prefer upright too — less chance of a valve hit.

Restrained. Chain or strap every cylinder. A falling cylinder with a sheared valve is a rocket.

Ventilated. Preferably store cylinders in the open or in a well-ventilated purpose-designed area.

Segregate. Oxidisers (oxygen) stored at least 3m from fuels (acetylene, LPG), or use a non-combustible partition.

Clear zone. Keep cylinders away from combustibles, ignition sources, traffic paths and emergency exits.

Label and rotate. Keep fulls and empties separate and run stock first-in, first-out where possible.

Each SDS in our safety hub has storage specifics for that gas. Check the SDS for gas-specific notes, and keep cylinder temperatures within a safe operating range.

What good gas storage looks like in practice

Good storage is not about making the cage look tidy for one inspection photo. It is about building a habit the site can actually maintain. Cylinders should be easy to identify, easy to restrain, easy to separate by gas type, and easy for the delivery driver to access without climbing over old stock or moving unrelated equipment out of the way.

That matters just as much at small sites as it does at large ones. A venue with only a couple of CO₂ or LPG cylinders can still get itself into trouble if fulls and empties are mixed together or if the storage point becomes a dumping ground for pallets and cardboard. The rule of thumb is simple: if the cylinder area is hard to read at a glance, it probably needs work.

What a better gas storage area usually includes

A dry, stable base. Avoid uneven, slippery or poorly drained ground that encourages corrosion or makes cylinders harder to handle safely.

Dedicated cylinder-only space. Do not let the storage area turn into a mixed store for fuel, paint, solvents, pallets or general junk.

Clear access. Staff and delivery drivers should be able to reach the storage point without shifting unrelated items or taking shortcuts.

Security. The area should be secure enough to prevent unauthorised access or theft.

PPE and emergency awareness. People handling cylinders should know the hazards, the site procedure and the right PPE for the task.

What to check when the site changes

Gas storage setups often become unsafe gradually. A new appliance goes in, a second gas type is added, or the business starts carrying more standby stock than it used to. Re-check the area whenever the gas mix, cylinder count or access pattern changes. That is usually when spacing, restraint and segregation start to drift away from the original plan.

If the gas storage point no longer suits the way the site operates, call before guessing. We can usually help you work out whether the answer is a different gas cylinder count, a cleaner swap rhythm, or a site-specific gas safety discussion with the right licensed people.
Transport guide
What changes once cylinders leave the storage area and go on a vehicle.
Safety hub
Browse SDS downloads and the rest of the safety library.
Safety & training
On-site briefings for teams handling cylinders every day.
Contact Puregas
Ask about a site-specific storage question before you guess.

Gas supply. No runaround.

Tell us what you need. We’ll confirm timing, paperwork and the next step.
Most metro orders placed by 2pm arrive next business day. Other zones run on schedule.
Puregas Australia Gas Supplier
Gas supply. Done right.
Australian-owned gas supply for industrial, welding, hospitality, food-grade, LPG and specialist supply needs.

Clear terms. Straight pricing. Specialist gas advice. One number.
Welding, hospitality and selected cylinder gases available nationally through 200+ dealer locations. Specialist supply confirmed by location.
One number · Orders · Trade accounts · Technical & SDS · Wholesale.
Melbourne operations
Victoria, Australia
Mon–Fri 8–4:30
© 2026 Puregas Pty Ltd. All rights reserved.