Skip to main content

How to Choose the Right Welding Gas for Your Project

How to Choose the Right Welding Gas for Your Project

Choosing the right welding gas can make the difference between a clean, strong weld and a frustrating mess. Whether you’re running a fabrication shop, maintaining equipment on a construction site, or tackling weekend projects in your shed, understanding which gas suits your process is essential.

At Puregas, we supply the full range of welding gases across Melbourne — from pure argon and CO2 to custom MIG mixes. Here’s a practical guide to help you pick the right one.

MIG Welding Gases

MIG (Metal Inert Gas) welding is the most common process in Melbourne workshops. The shielding gas you choose affects arc stability, spatter levels, penetration depth, and the finish of your weld bead.

Argon/CO2 Mix (Argoshield, 75/25 or 80/20): The go-to for mild steel MIG welding. A 75% argon / 25% CO2 blend gives you a smooth arc, low spatter, and good penetration. It works well on sheet metal through to structural steel. This is the gas most Melbourne fabricators start with.

Pure CO2: A budget-friendly option for mild steel. CO2 gives deeper penetration than argon mixes, but produces more spatter and a rougher bead. It’s popular for heavy structural work where appearance matters less than strength. Puregas supplies CO2 in cylinders from small portables up to G-size.

Argon/CO2/Oxygen Tri-Mix: Used for stainless steel MIG welding. A small amount of oxygen or CO2 (around 2–3%) mixed with argon improves arc stability on stainless without compromising corrosion resistance.

TIG Welding Gases

TIG (Tungsten Inert Gas) welding demands a pure inert shielding gas to protect the tungsten electrode and weld pool from contamination.

Pure Argon: The standard TIG gas for steel, stainless steel, and aluminium. Argon provides a stable, quiet arc and excellent gas coverage. For most TIG work in Melbourne, pure argon is all you need. Puregas supplies argon in D, E, and G-size cylinders.

Argon/Helium Mix: Adding helium increases heat input, which helps when TIG welding thicker aluminium sections. The higher thermal conductivity of helium gives better penetration and faster travel speeds on heavy aluminium fabrication jobs.

Oxy-Fuel Gases

For cutting, brazing, and heating, you’ll need an oxy-fuel setup combining oxygen with a fuel gas.

Oxygen + Acetylene: The classic combination for oxy cutting and welding. Acetylene burns at the highest flame temperature of any fuel gas, making it ideal for cutting thick steel plate, brazing, and heating for bending. Puregas supplies both dissolved acetylene and oxygen cylinders.

Oxygen + LPG: A more affordable alternative for heating and some cutting applications. LPG doesn’t reach the same flame temperature as acetylene, but for preheating, post-heat treatment, and lighter cutting duties it’s a practical choice — and the fuel cost is significantly lower.

Quick Reference: Which Gas for Which Job?

Mild steel MIG welding: Argon/CO2 mix (75/25 or 80/20)

Stainless steel MIG: Argon with 2% CO2 or tri-mix

Aluminium MIG: Pure argon

TIG welding (all metals): Pure argon

Heavy aluminium TIG: Argon/helium mix

Oxy cutting: Oxygen + acetylene

Preheating and brazing: Oxygen + acetylene or oxygen + LPG

Why Gas Quality Matters

Contaminated or low-purity gas causes porosity, weak welds, and wasted time grinding and re-doing work. Puregas cylinders are filled to Australian standards and stored properly to ensure consistent quality every time you connect a regulator.

If you’re unsure which gas or cylinder size suits your workshop, our team can recommend the right setup based on your welding process, material, and how often you weld.

Related Services

Call 1300 733 097

Request a Quote

Related Puregas Services

Browse our full range of welding gases including argon, CO2, and MIG/TIG mixes. Need help with your setup? Read our regulator pressure settings guide. We deliver to Bayswater, Sunshine West, and all Melbourne suburbs.

Puregas Australia Gas Supplier
Gas supply. Done right.
Australian-owned gas supply for industrial, welding, hospitality, food-grade, LPG and specialist supply needs.

Clear terms. Straight pricing. Specialist gas advice. One number.
Welding, hospitality and selected cylinder gases available nationally through 200+ dealer locations. Specialist supply confirmed by location.
One number · Orders · Trade accounts · Technical & SDS · Wholesale.
Melbourne operations
Victoria, Australia
Mon–Fri 8–4:30
© 2026 Puregas Pty Ltd. All rights reserved.