Argon HE75 (Al Thick Weld)
Argon HE75 helium-rich shielding gas for thick aluminium sections and hotter weld procedures.
Where Argon HE75 fits.
Best for
- Thick-section aluminium TIG or MIG setups already specified for Argon HE75
- Heavy aluminium fabrication where the current weld procedure already uses this blend
- Sites replacing an existing HE75 cylinder rather than changing the gas path
Check before ordering
- Send the current blend, cylinder label or weld procedure if you are replacing an existing setup.
- If the job already runs straight argon or HE25, match that gas rather than switching it.
- If the metal family is mild steel or stainless, move to the matching welding-gas family instead.
Argon HE75 is a higher-helium aluminium lane.
Use it where the current weld procedure already specifies this blend for thicker aluminium and higher heat input.
Helium content changes the job feel
If you are replacing an existing gas, send the current bottle, label or weld procedure details and we will match the correct aluminium blend.
Straight argon and lower-helium blends are different lanes
If the job already runs straight argon or HE25, match that path rather than treating the blends as interchangeable.
Argon HE75 is a 25/75 argon and helium shielding mix used for thick-section aluminium welding. It is the higher-heat option when the weld procedure needs more heat input than straight argon or lower-helium blends.
Cylinder sizes
Published sizes. Not every application needs a G — we’ll size it to your actual draw rate.
| Size | Contents (m³) | Pressure @ 15°C | Water Capacity (L) | Colour | Connection |
|---|---|---|---|---|---|
| D | 2.1 | 19000 | 10 | Peacock Blue (brown top) | Type 10 |
| E | 5 | 19000 | 23 | Peacock Blue (brown top) | Type 10 |
| G | 10.5 | 19000 | 50 | Peacock Blue (brown top) | Type 10 |
Cylinder contents pressure is referenced at 15°C. Actual pressure can vary with ambient temperature.
Hazards
- Argon and helium are inert asphyxiants and can displace oxygen in poorly ventilated spaces.
- Use only in ventilated work areas and follow the SDS.
Argon HE75 (Al Thick Weld) SDS
What matters on site
Use the correct regulator, connection and pressure-rated equipment.
Keep cylinders upright, secured and used in ventilated work areas.
Do not change the aluminium weld-gas blend by guesswork; match the gas the procedure already uses.
If you are replacing an existing supply, send the current cylinder label or procedure details and we will match it.
Frequently Asked Questions About Argon HE75 (Al Thick Weld)
Need a different welding gas?
Argon HE75 is one aluminium-gas lane. If the current job uses straight argon, a lower-helium blend or another metal family, start with the matching gas below.
